How To's
How-to videos and photo walk-throughs for tha Heist and Misfit
MISFIT 250 SERVICE VIDEO
|
HEIST OIL CHANGE |
MISFIT OIL CHANGE |
OIL SCREEN LOCATION
The oil screen is located under this cover.
It's a 24mm hex head on the lower right side of the motor on the lower end. The cover comes off there is a sprint and the mesh screen filter is nipple out. Use carb cleaner to clean it let it dry while the oil drains. To replace - the wider open side goes first, cone side out, then spring, finally the cover.
Make sure that the cover has the gasket in it, and use some new oil on the gasket to create a better seal.
It's a 24mm hex head on the lower right side of the motor on the lower end. The cover comes off there is a sprint and the mesh screen filter is nipple out. Use carb cleaner to clean it let it dry while the oil drains. To replace - the wider open side goes first, cone side out, then spring, finally the cover.
Make sure that the cover has the gasket in it, and use some new oil on the gasket to create a better seal.
VALVE ADJUSTMENT
|
|
| ||
HEIST CHAIN ADJUSTMENT
HEIST 16T SPROCKET & CHAIN UPGRADE - PHOTOS
(Courtesy of Joe Brown)
(Courtesy of Joe Brown)
|
upgraded chain and sprocket on the Heist motorcycle:
CLICK HERE FOR PHOTOS NOTE: Apply Loctite (thread lock) to the bolts on the front sprocket |
HEIST SEAT SPRINGS - INSTALLATION GUIDE VIDEO
(Courtesy of Alex Wilkinson)
(Courtesy of Alex Wilkinson)
HEIST IDLE SPEED AND AIR/FUEL MIX ADJUSTMENT
(Courtesy of Alex Wilkinson)
Connecting CCW LED tail light to the Heist
